Wallaby Video Suite - 2021

AgTEM Video Suite 2021

A full set of instructions on AgTEM survey was recorded as videos in August 2021. Considerable improvement in AgTEM electronics has occurred since the video was made, such that some of the awkward issues in the video are now resolved. See also the software section of this website that presents a startup equipment functionality verification procedure that everyone should do on every job.

Videos are grouped into sequential parts under the following headings:

Overview: An overview of AgTEM and how it is used
Quick Deploy : Setting up AgTEM from the Quick Deployment trailer
Shipping Box : Setting up AgTEM completely from the Shipping Box
Front Loop : Setting up the Front Loop from the Quick deployment trailer
Electronics : Setting up the AgTEM electronics
Acquisition : Acquiring data – follows on from the electronics series
How to roll up shielded cables : Very important for care of equipment
Sales Overview : AgTEM presentation for introductory purposes.

The ‘Quick Deploy’ series should be viewed by anyone using the AgTEM system regardless of if they use the ‘Quick deployment’ float trailer or a float trailer of opportunity.

‘The AgTEM manual’ should be observed to get a full understanding of AgTEM data acquisition procedure. The video can make it look easy but the manual will thoroughly cover scenarios that operators may encounter. Video will help readers of the manual tremendously as they see operations put into real context and sequence.

The video content is split into small parts to make it easier to access and review specific aspects of operations.

The full list of videos is as follows: Duration 2 hours 48min 21sec 55GBytes

Overview

AgTEM_Overview 3:21

Quick deployment trailer operation

AgTEM_QuickDeploy_Part_1_Unsecuring 2:33

AgTEM_QuickDeploy_Part_2_Removing_Booms2:07

AgTEM_QuickDeploy_Part_3_Roll Down 2:02

AgTEM_QuickDeploy_Part_4_VehicleCables 1:25

AgTEM_QuickDeploy_Part_5_Attaching booms4:04

AgTEM_QuickDeploy_Part_6_Packup_onto_Trailer 2:36

shipping box - unpacking and setup

AgTEM_ShippingBox_Part_1_OpeningTheBox3:14

AgTEM_ShippingBox_Part_2_Unpacking 13:55

AgTEM_ShippingBox_Part_3_Close_empty_box 1:06

AgTEM_ShippingBox_Part_4_Attach_Undercarriage6:13

AgTEM_ShippingBox_Part_5_Attach_Drawbar 11:17

AgTEM_ShippingBox_Part_6_Attach_Booms13:38

AgTEM_ShippingBox_Part_7_Attach_TxLoop 5:07

AgTEM_ShippingBox_Part_8_Drawbar_cables2:11

Front loop operations

AgTEM_Front_loop_Part_1_Unpack_from_QuickDeployTrailer1:31

AgTEM_Front_loop_Part_2_Join_with_Booms 2:35

AgTEM_Front_Loop_Part_3_Mounting_on_pickup3:41

AgTEM_Front_Loop_Part_4_Driving4:03

Electronics setup and choices

AgTEM_Electronics_Part_1_Transmitter 11:09

AgTEM_Electronics_Part_2_Vehicle_Wiring_Loom4:13

AgTEM_Electronics_Part_3_Receiver 4:45

AgTEM_Electronics_Part_4_Receiver_Connection 2:23

AgTEM_Electronics_Part_5_Option_7AmpHrBatteries5:15

AgTEM_Electronics_Part_6_Power_Supply_Options3:28

AgTEM_Electronics_Part_7_In_Vehicle_Connections 4:32

AgTEM_Electronics_Part_8_Positioning_Options 6:30

AgTEM_Electronics_Part_9_Small_Test_Loops 1:08

AgTEM_Electronics_Part_10_Power_Up 6:44

Acquisition

AgTEM_Acquisition_Part_1_Receiver_Power_Up3:42

AgTEM_Acquisition_Part_2_Software_Setup7:00

AgTEM_Acquisition_Part_3_ContinuousAcquisition 14:30

AgTEM_Acquisition_Part_4_Diagnostics 3:43

Miscellaneous

AgTEM_HowToRollUpShieldedCables 2:40

Access the video content here: Wallaby Video Suite - 2021